Halogen headlamps
1
High beam/daytimerunninglights:
H1555W/15W
2
Lowbeam/perimeterlights: H7 55 W/W 5W
3
Turn signal lights: 3457NAK 28 W
Replacing halogenheadlamps
Requirements:
R
Lowbeam: bulb type H7 55 W
R
High beam/daytimerunninglamps: bulb
type H1555W/15W
R
Perimeterlights: bulb typeW5W
R
Turn signal lights: bulb type 3457NAK
28 W
1
Lowbeam/perimeterlighthousing cover
2
High beam/daytimerunninglamps housing
cover
3
Turn signal light socket
#
Switchoff thelighting system.
#
Lowbeam/perimeterlight: remove housing
cover 1 towardsthe rear.
#
Pull out thesockettowards therear.
#
Remove thebulb from thesocket.
#
Insert thenew bulb intothe socketsuchthat
thebase of thebulb restsfullyagainstthe
base of thesocket.
#
Align and insertthe socket.
#
Attach housing cover 1.
#
High beam/daytime running lamps:
remove housing cover 2 towardsthe rear.
#
Turn thesocketcounter-clockwise and pull it
out.
#
Remove thebulb from thesocket.
#
Insert thenew bulb intothe socketsuchthat
thebase of thebulb restsfullyagainstthe
base of thesocket.
#
Insert thesocketand turnitclockwise.
#
Attach housing cover 2.
#
Turn signal light:
#
Turn socket 3 counter-clockwise and
remove it.
#
Gently turnthe bulb counter-clockwise and
take it out of thesocket.
#
Insert thenew bulb intothe socketand turnit
clockwise.
#
Insertsocket 3 and turnitclockwise.
Additional turnsignal light
Requirements:
R
Additional turnsignal light (all-wheel
drivevehicles): bulb typeP21W
#
Switching offthe lighting system.
88
Light and vision