#
Unscrew screws1 and remove lens 2.
#
Gently turnthe bulb counter-clockwise and
take it out of thesocket.
#
Insert thenew bulb intothe socketand turnit
clockwise.
#
Place lens2 in position and tightenthe
screws1.
Replacing rear light bulbs(Cargo Vanand
Passenger Van)
Overviewofrear light sourcetypes (Cargo
Vanand Passenger Van)
Youcan changethe following light sources.
Vehicles withstandardtail lamps
1
Brakelights/tail lamps/perimeterlights:
P21W
2
Backing up light:P21W
3
License plate lamp: W5W
4
Rear foglight:P21W
Youcan changethe following light sources.
Vehicles withpartial LED tail lamps
1
Backinguplight:P21W
2
License plate lamp: W5W
3
Rear foglight:P21W
Changing thetail lamps (Cargo Vanand
Passenger Van)
Requirements:
R
Brakelights/tail lights/perimeterlights:
bulb typeP21W
R
Backinguplights: bulb typeP21W
R
Rear foglights: bulb type P21W
1
Brakelight/taillight/perimeterlight
2
Backing up light
3
Rear foglight
#
Switchoff thelighting system.
#
Open therear-end door.
Light and vision
89
To Next Page
Loading...
