Froling T4 - Checking the Ash Level in the Dustbin

NOTICE! The frequency at which the following work is carried out depends on energy
requirements, fuel quality and number of operating hours.
5.1.1 Checking the ash level in the dustbin
NOTICE
Exceeding the dustbin’s maximum load may result in damage to the dustbin and
serious difficulties in emptying it.
As a result:
❒ do not exceed the dustbin’s maximum load
⇨ See "Technical specifications" [page 12]
The fill level of the dustbin can also be checked while the system is in operation.
However:
▪
the coreless screw must not be in operation (listen for movement).
– Caution: if the dustbin is opened while the coreless screw is in motion, large
amounts of dust will be released!
1. Undo the quick lock
2.
Open the dustbin
3. Check the fill level
– Refer to the maximum load of the dustbin ⇨ See "Technical specifications"
[page 12]
4. Quickly close and lock the dustbin again
– Caution: if the dustbin is opened while the coreless screw is in motion, large
amounts of dust will be released!
5. Empty the dustbin whenever necessary
5
Servicing
Inspection and cleaning
32 Fröling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com