Fronius IG Plus 5.0-1 User Manual

13
Should there be insufficient heat dissipation in spite of the fan operating at
maximum speed (for example inadequate heat transfer away from the
heat sinks) the power will be derated for protection of the Fronius IG Plus
unit.
Derating the power reduces the output of the Fronius IG Plus unit for a
short period sufficient to ensure that the temperature will not exceed the
admissible limit.
Your Fronius IG Plus unit will remain ready for operation as long as pos-
sible without any interruption.
Power Dera-
ting

Fronius IG Plus 5.0-1 Specifications

General

Nominal AC Power	5000 W
AC Nominal Voltage	230 V
Frequency	50 / 60 Hz
Max Apparent AC Power	5000 VA
Max Output Current	21.7 A
THD	< 3 %
Inverter Design	Transformerless
AC Connection	Screw terminals