Preparing knockouts for connection 41
Installing the mounting bracket and attaching the inverter 42
Selecting the mounting material 42
Properties of the mounting bracket 42
Do not deform the mounting bracket 42
Fitting the mounting bracket to a wall 42
Installing the mounting bracket on a mast or beam 43
Attaching the mounting bracket to mounting rails 44
Attaching the inverter to the mounting bracket 44
Requirements for connecting the inverter 45
Various cable types 45
Permitted cables for the electrical connection 45
Cable diameter for push-in terminals 46
Permitted cables for the data communication connection 46
Maximum alternating current fuse protection 47
Connecting the inverter to the public grid (AC side) 49
Safety 49
Suitable grids 49
Connecting the inverter to the public grid (AC side) 50
Connecting solar module strings to the inverter 53
General information about PV modules 53
Safety 53
PV generator, general 54
Module array configuration 7.7 ‑ 10.0 kW 54
Connecting solar module strings to the inverter 55
Connecting backup power - PV Point (OP) 59
Safety 59
Installation 60
Connecting the data communication cables 63
Modbus participants 63
Routing data communication cables 64
Terminating resistors 64
Installing the WSD (wired shutdown) 66
Closing and commissioning the inverter 67
Closing the inverter's connection area/housing cover, and commissioning 67
Starting the inverter for the first time 67
Installation with the app 68
Installation with the browser 68
De-energizing the inverter and switching it back on 70
De-energizing the inverter and switching it back on 70
Settings – User interface of the inverter 71
User settings 73
User login 73
Selecting languages 73
Device configuration 74
Components 74
Functions andI/Os 74
Inverter 74
Load management 78
Load management 78
System 79
General 79
Update 79
Setup wizard 79
Restoring factory settings 79
Event log 79
Information 79
License manager 80
Support 80
Communication 82
4
To Next Page
Loading...
