Fronius Robacta Reamer V Easy - Safety for Components and Connections

(5) Parting agent adjuster
for adjusting the amount of parting agent sprayed inside the gas nozzle
(6) Lifting device
lifts the cleaning motor and the cleaning cutter when cleaning the inside of the
gas nozzle
(7) Cleaning motor with parting-agent injection nozzle
drives the cleaning cutter
(8) Compressed air connection for the wire cutter option
(9) Parting-agent injection nozzle
applies the parting agent to the inside and front of the gas nozzle
(10) Cleaning cutter
with internal through hole for the parting-agent injection nozzle
(11) "Spray parting agent" button
for manually testing the spray device - when the button is pressed, only the spray
device is activated (compressed air or a mixture of compressed air/parting agent
is sprayed from the parting-agent injection nozzle). The other functions of the
cleaning device remain inactive.
(12) Gas nozzle clamping device
holds the gas nozzle in place during cleaning
(13) Protective covering
29
EN