Fronius Robacta Reamer V Easy - Robacta Reamer V Easy, Robacta Reamer V Easy Han6 P J Control Elements, Connections and

Robacta Reamer V Easy, Robacta Reamer V Easy
Han6P J control elements, connections and mech-
anical components
Robacta Reamer
V Easy, Robacta
Reamer V Easy
Han6P J control
elements, con-
nections and
mechanical com-
ponents
NOTE!
The control elements, connections and mechanical components are shown on the
Robacta Reamer V Easy.
The control elements, connections and mechanical components are the same for the
Robacta Reamer V Easy Han6P J.
(1)
(2)
(3)
(4)
(5)
Side view
(6)
(11)
(12)
(13)
(7)
(9)
(10)
(8)
Front view
(1) Harting Han6P connection socket (X1)
for a + 24 V DC supply
CAUTION!
Risk of damage to Harting Han6P connection (X1) supply due to overcurrent.
Secure supply against overcurrent with a 500 mA slow-blow fuse.
(2) Compressed air connection
for a dry compressed air supply at 6 bar (86.99 psi)
Thread identification compressed air connection: G ¼“
(3) Parting agent container
(4) "Cleaning" screw
for manually testing all cleaning device functions:
- Cleaning motor on/off
- Lifting device up/down
- Gas nozzle clamping device extending/retracting
- Compressed air and parting agent supply to parting-agent injection nozzle
(compressed air/parting agent mixture is sprayed out of the parting-agent
injection nozzle)
28