Fronius Robacta Reamer V Easy - Robacta Reamer V Easy Han6 P J Scope, Options, and Components

Robacta Reamer V scope of supply and options
Robacta Reamer
V scope of sup-
ply
(1)
(2)
(3)
(4)
(5)
NOTE!
The "Robacta Reamer" parting agent
(item number 42,0411,8042) and the
cleaning cutter are not part of the
scope of supply.
(1) Robacta Reamer V cleaning
device
(2) Spatter tray retainer
(3) Spatter tray
(4) Tightening key for cleaning motor
(5) Compressed air relief valve
not shown:
(6) Standard I/O connecting plug (X1) without cable
(7) Operating instructions
(8) Fixings for assembling the cleaning device:
- 4 screws
- 4 washers
- 4 lock washers
- 4 nuts
Robacta Reamer
V options
The following options are available for the cleaning device:
- Installation stand
- Wire cutter
- Suction line for canister (10 litres)
23
EN