Fronius Robacta Reamer V Easy Operating Instructions

1
5
NOTE!
Route the compressed air hose for the
wire cutter behind the cleaning device
* Use a suitable adapter to connect
the wire cutter compressed air
hose to the cleaning device.
Installing the
electrically-con-
trolled wire cutter
1
NOTE!
Use the fixings supplied with the wire
cutter
Ensure that the recesses in the spacers
face the cleaning device.
2
NOTE!
The wire cutter must be controlled elec-
trically by the robot control
51
EN

Fronius Robacta Reamer V Easy Specifications

General

Brand	Fronius
Model	Robacta Reamer V Easy
Category	Welding System
Language	English