Fronius Robacta Reamer V Easy User Manual

48
Fitting the cleaning cutter
General
NOTE!
The cleaning cutter is fitted in the same way for all Robacta Reamer V cleaning de-
vices.
Fitting the clean-
ing cutter
CAUTION!
A cleaning cutter that has become very hot through use can cause severe burns.
Before handling cleaning cutters, allow cleaning cutter to cool to room temperature (+25°C,
+77 °F).
NOTE!
Only use the device manufacturer's contact tips, gas nozzles and cleaning cutters.
If other manufacturers' products are used, trouble-free operation of the device cannot be
guaranteed. The manufacturer accepts no liability for damage resulting from the use of oth-
er manufacturers' contact tips, gas nozzles or cleaning cutters.
NOTE!
The cleaning cutter is not part of the scope of supply.
Consult the manufacturer's spare parts list for the appropriate cleaning cutter.
Remove the protective covering from the cleaning device
7
Fit the protective covering to the cleaning device in its original position
1
2
1
2
3

Fronius Robacta Reamer V Easy Specifications

General

Brand	Fronius
Model	Robacta Reamer V Easy
Category	Welding System
Language	English