Fronius Robacta Reamer V Easy - Adjusting the Parting Agent Nebuliser Spray Amount

59
EN
1 2
* Option (long parting agent hose)
3
Adjusting the
parting agent
nebuliser spray
amount
NOTE!
To ensure that the spray amount is adjusted properly, the welding torch must be in
the cleaning position.
Establish a compressed air supply to the cleaning device
Connect the cleaning device to the robot control
Start the spraying process using the robot control and check that sufficient spray is be-
ing applied
222222
1
2
3
4
1
*
2
22
33
11
3
1
2
3