89
EN
Safety
Safety Observe the following safety rules for all work described in the "Troubleshooting" section.
WARNING!
Incorrect operation or poorly executed work can cause serious injury or damage.
All activities described in these Operating Instructions may only be carried out by trained
and qualified personnel. All functions described in these Operating Instructions may only
be used by trained and qualified personnel. Do not carry out any of the work or use any of
the functions described until you have fully read and understood the following documents:
► these Operating Instructions
► all the Operating Instructions for the system components, especially the safety rules
WARNING!
Machines that start up automatically can cause serious injury and damage.
In addition to these Operating Instructions, the safety rules issued by the manufacturer of
the robot and welding system must also be observed. For your personal safety, ensure that
all protective measures have been taken and will remain in place while you are in the work-
ing area of the robot.
WARNING!
Risk of serious injury from:
► mechanically powered components
► flying parts (shavings, etc.)
► compressed air/parting agent mixture escaping from the parting-agent injection nozzle
► Before performing work on the cleaning device or any connected system components:
► disconnect the customer's compressed air and power supplies from the cleaning de-
vice and the connected system components, and ensure that they remain disconnect-
ed until work is complete
► ensure that the cleaning device is depressurised - please see the "Ensuring that the
cleaning device is depressurised" section below for the relevant instructions
WARNING!
Whenever the cleaning device is supplied with voltage and/or compressed air, a risk
of serious injury exists from:
► rotating cleaning cutter
► upwards/downwards travelling cleaning motor
► extending/retracting gas nozzle clamping device
► activated wire cutter
► flying parts (shavings, etc.)
► compressed air/parting agent mixture escaping from the parting-agent injection nozzle
To Next Page
Loading...
Need help?
General
