WARNING!
Danger from charging unsuitable batteries.
Serious personal injury and property damage as a result of escaping gases, igni-
tion, or explosion may result.
▶
Only connect batteries to the battery charger which are suitable for the bat-
tery charger in terms of their type, voltage, and capacity and which corres-
pond to the settings on the battery charger.
The battery charger is designed for charging lead acid batteries and NiCd batter-
ies.
-
Pb-WET batteries (PzS, GiS, ...):
Venting, closed lead acid wet batteries with liquid electrolyte.
-
Pb-GEL batteries (PzV, GiV, ...):
Valve-regulated, sealed lead acid batteries (VRLA) with fixed electrolyte (gel
or fleece).
-
NiCd batteries:
Closed or sealed NiCd batteries with liquid electrolyte.
-
Pb-CSM-WET batteries (Copper Strained Metal):
Closed lead acid CSM batteries with liquid electrolyte.
-
Lead Crystal batteries:
Type EVFJ/CNFJ Lead Crystal batteries.
The device must be handled correctly in order for it to work. Never pull on the
cable when handling the device.
Grid connection
WARNING!
Danger from electric current.
This can result in serious injury or death.
▶
Before starting work, switch off all the devices and components involved and
disconnect them from the grid.
▶
Secure all the devices and components involved to prevent unintentional re-
starting.
WARNING!
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
All the work and functions described in this document must only be carried
out by trained and qualified personnel.
▶
Read and understand this document.
▶
Read and understand all the Operating Instructions for the system compon-
ents, especially the safety rules.
WARNING!
Danger due to faulty or insufficient power supply.
This can result in serious injury and damage to property.
▶
The power supply requirements detailed in "Technical data" must be met.
12
To Next Page
Loading...
Need help?
General
