Menu selection
Change from standard mode to the menu selection as follows:
1
Press and hold the "Menu" key for approx. 5 seconds.
Change from all other modes to the menu selection as follows:
1
Briefly press the "Menu" key.
To select the desired mode:
2
Use the "Up/Down" keys to select the symbol for the desired mode.
-
e.g. the battery symbol for standard mode
3
Use the "Pause/Start" key to confirm the "Tick" symbol.
Statistics mode In statistics mode, horizontal bars dis-
play the frequency of the following
device operating statuses:
-
Idle
-
Charging
-
Floatingcharge
-
Cooldown
-
Error
1
Use the "Up/Down" keys to toggle between page 1/2 and page 2/2.
Page 2/2 shows the following values:
-
Total number of charges.
-
Total Ah output.
-
Average Ah output per charge.
-
Total energy consumed (kWh).
-
Average energy consumed (kWh)
per charge.
The consumed energy display is a standard value and can deviate from the actual
amount of energy by up to 5% at nominal output. At lower power levels the devi-
ation may be higher.
History mode History mode provides information about the parameters for all the stored char-
ging processes. In order to show changing or different displays, two versions of
the display window are shown below:
33
EN
To Next Page
Loading...
Need help?
General
