When opportunity charging is "ON" and a battery is connected, the following ap-
pears:
Display when RI characteristic is selected Display for other characteristics (e.g. IUI)
To start opportunity charging:
-
Use the "Up" key to select the runner symbol (1).
"Runner symbol" (1)
Display when opportunity charging starts
DC connection DC Connection:
The “DC Connection” menu contains
the setting for the DC connection
check.
If the DC connection check is switched
on (“ON”), the connection between the
charger and the battery is checked
during the charging process.
If problems arise with the DC connec-
tion during the charging process,
status code 17 is set if the DC connec-
tion check is active.
A connection problem can occur if, for
example, charging contacts are worn or
dirty.
Additional func-
tions
Detailed description of the "additional functions" menu item in configuration
mode. Navigation is performed as described in the "Configuration mode" section.
1
Select the "additional functions"
menu item.
45
EN
To Next Page
Loading...
Need help?
General
