Warning notices
inside the device
WARNING!
Danger from electric shocks.
This can result in serious injury or death.
▶
The housing must never be opened by anyone other than a service technician
trained by the manufacturer.
▶
The device must be disconnected from the mains before starting any work
with the housing open. A suitable measuring instrument must be used to en-
sure that electrically charged components (e.g. capacitors) are fully dis-
charged.
▶
Use an easily legible and understandable warning sign to ensure that the
device is not reconnected to the mains supply before all the work has been
completed.
Inside the device:
2 kW
4,010,xxx
xxxxxxxx
XXXX
UDC nom. xxV
Part No.:
Ser. No.:
1
2
1 Display
2 Battery CR2032
WARNING Hazardous Voltage
Kondensator Entladezeit < 2 min.
Capacitor discharge time < 2 min.
Décharge de condensateur < 2 min.
Condensador tiempo de descarga < 2 min.
Condensatore tempo di scaricamento < 2 min.
3 kW
4,010,xxx
xxxxxxxx
XXXX
UDC nom. xxV
Part No.:
Ser. No.:
1
2
1 Display
2 Battery CR2032
WARNING Hazardous Voltage
Kondensator Entladezeit < 2 min.
Capacitor discharge time < 2 min.
Décharge de condensateur < 2 min.
Condensador tiempo de descarga < 2 min.
Condensatore tempo di scaricamento < 2 min.
Setup regula-
tions
WARNING!
Danger from devices falling or toppling over.
This can result in severe personal injury and damage to property.
▶
Set up all system components in a stable position.
▶
When using a floor bracket or wall bracket, always ensure that all fastening
elements are firmly seated.
The device has been tested according to protection class 21. This means:
-
Protection against the penetration of solid foreign bodies with a diameter of
more than 12.5 mm (0.49 in.)
-
Protection against dripping water falling vertically
15
EN
To Next Page
Loading...
