Fronius Selectiva 3.0 Operating Instructions

Wall and floor
bracket
WARNING!
Danger from incorrectly performed work and falling equipment.
This can result in severe personal injury and damage to property.
▶
The mounting must only be carried out by trained and qualified personnel.
Depending on the substrate, different dowels and screws are required. Therefore,
dowels and screws are not part of the scope of supply. The system installer is re-
sponsible for selecting the proper dowels and screws.
WARNING!
Danger from objects falling or toppling over.
This can result in severe personal injury and damage to property.
▶
Only use this wall bracket with the battery charger provided by the manufac-
turer.
▶
Mount the device horizontally.
▶
For wall mounting, the load bearing capacity of the wall must be sufficient.
Weight of wall bracket:
2 kW (B1) 1.10 kg (2.43 lb)
3 kW (C1) 1.35 kg (2.98 lb)
1
*
TX25
3
3
3
*
*
2
17
EN

Fronius Selectiva 3.0 Specifications

General

Brand	Fronius
Model	Selectiva 3.0
Category	Battery Charger
Language	English