The I-SPoT-VIEWER software (www.fronius.com/i-spot) supports the visualiza-
tion and evaluation of the data on the USB thumb drive.
To start a data download, confirm this again with the "Pause/Start" button. If this
repeated confirmation with the "Pause/Start" button is not carried out, the
download starts automatically after one minute.
While a charging process is in progress, the USB thumb drive may be connected
after pressing the "Pause/Start" button. It is only possible to read data and not to
perform an update or load a configuration.
Safely remove
-
Safely remove the USB thumb drive once the desired action is complete.
Update
-
A list of suitable update files stored on the USB thumb drive opens.
-
The desired file is selected and confirmed in the same way as scrolling
through the settings.
-
Do not rename the automatically assigned file name of the update file!
-
The latest firmware is available in the download area of the Fronius website.
-
Firmware installation instructions are included in the zip file of the down-
load.
Download
-
The data of the logged charging parameters stored in the datalogger of the
device are saved for the I-SPoT VIEWER on the USB thumb drive.
-
Events as well as device settings and user curves (configuration) are also
saved.
-
The following time ranges can be selected for the data logger:
1 month
3 months
All
Since last time
Download optional
The following options are available:
-
I-SPoT VIEWER
The logged data is saved in the same way as for the "Download", but only with
the data for the I-SPoT VIEWER.
-
Save data logger
The logged data is saved in the same way as for the "Download", but as "csv"
files rather than in the I-SPoT VIEWER format.
(Automatically created folder structure for the ".csv" files: *
Fronius\<Device serial number>\Charges\<yyyymmdd>\<hhmmss.csv>)
-
Save events.
Events are saved on the USB thumb drive.
-
Save configuration.
The device settings are saved on the USB thumb drive.
Load configuration
-
Loads a suitable device configuration stored on the USB thumb drive into the
device.
Load dealer text
-
Here a text file can be loaded from the USB thumb drive, which is displayed
as soon as the device is in an error state.
-
The text file can contain the contact details of the distributor, for example.
-
The file must be saved on the USB thumb drive in the ".txt" format in "uni-
code".
-
The file name must be "dealer.txt".
-
The number of characters is limited to 99.
50
To Next Page
Loading...
Need help?
General
