Warning notices
on the device
Warning notices and safety symbols are affixed to the power sources. These warning
notices and safety symbols must not be removed or painted over. They warn against
operating the device incorrectly, as this may result in serious injury and damage.
Welding is dangerous. The following basic requirements must be met:
- welders must be sufficiently qualified
- suitable protective equipment must be used
- all persons not involved in the welding process must be kept at a safe distance
Do not use the functions described here until you have thoroughly read and understood
the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the safety rules
22
To Next Page
Loading...
