The venting duct is a very important safety device. When choosing the installation loca-
tion, ensure that the cooling air can enter and exit unhindered through the air ducts on
the front and back of the device. Electroconductive metallic dust (e.g. from grinding work)
must not be allowed to get sucked into the device.
Mains connection The devices are designed for the mains voltage specified on the rating plate. If your ver-
sion of the appliance does not come with mains cables and plugs ready-fitted, these
must be fitted in accordance with national regulations and standards. For details of fuse
protection of the mains lead, please see the technical data.
CAUTION!
An inadequately dimensioned electrical installation can cause serious damage.
▶
The mains lead and its fuse must be dimensioned to suit the local power supply. The
technical data shown on the rating plate applies.
41
EN
To Next Page
Loading...
