3-44
Display of running status information at the time of alarm
By pressing the
key while an alarm code is displayed, you can view the output frequency, output current,
and other data concerning the running status. The data you can view is the same as with "6. ALM INF." Use
and
keys for scrolling pages within the menu.
Pressing the
key or the key while the running status information is displayed will take you back to the
display of the alarm code.
Transition to Programming mode
By pressing the
key while alarm information is displayed, you can switch to the Programming mode, in
which you can use a variety of features such as changing function code data.
Resetting alarm; transition to Running mode
When you remove the cause of the alarm and press the
key, the alarm condition will be reset, and the
inverter will go back to the Running mode.
Figure 3.33 summarizes the menu transition between these modes.
Figure 3.33 Menu Transition in/from Alarm Mode
To Next Page
Loading...
