Fuji Electric FRENIC-ECO - Control Circuit Terminals; The Control Circuit Terminals (Common to All Models; The RS-485 Communication Terminals

2-13
(2) The control circuit terminals (common to all models)
Screw size: M3 Tightening torque: 4.4 to 5.3lb-in(0.5 to 0.6 (N·m))
Table 2.7 Control Circuit Terminals
Screwdriver to be used
(Head style)
Allowable wire size
Bared wire length
Dimension of openings in the
control circuit terminals
Flat head
(0.6 x 3.5 mm)
AWG26 to AWG16
(0.14 to 1.5 mm
2
)
0.28 inch (7 mm)
0.10 (W) x 0.11 (H) inch
(2.75 (W) x 2.86 (H) mm)
(3) The RS-485 communication terminals
Screw size: M3 Tightening torque: 4.4 lb-in(0.5 (N·m))