Fuji Electric FRENIC-ECO - Items Displayed on LED Indicators

3-3
Items Displayed on LED Indicators
Type Item Description (information, condition, status)
Hz Output frequency, frequency command
A Output current
V Output voltage
% Calculated torque, load factor, speed
r/min Motor speed, set motor speed, load shaft speed, set load shaft speed
m/min Line speed, set line speed (Not applicable to FRENIC-Eco)
kW Input power, motor output
X10 Data greater than 99,999
min Constant feeding rate time, constant feeding rate time setting (Not applicable
to FRENIC-Eco)
sec Timer
Unit of Number
Displayed on
LED Monitor
PID PID process value
FWD Running (forward rotation)
REV Running (reverse rotation)
Operating
Status
STOP No output frequency
REM Remote mode
LOC Local mode
COMM Communication enabled (RS-485 (standard, optional), field bus option)
JOG Jogging mode (Not applicable to FRENIC-Eco)
Source of
Operation
HAND Keypad effective (lights also in local mode)