Fuji Electric FRENIC-ECO - Menu Transition for I;O Check

3-21
Highlighted when short-circuited; normal when open
Highlighted when 1; normal when 0
Highlighted when ON;
normal when OFF
Input signal at control circuit terminal block
Output signal
Input signal coming via communication link
Input voltage at terminal [12]
Input current at terminal [C1]
Input voltage at terminal [V2]
Figure 3.15 Menu Transition for "I/O CHECK"
Output voltage at terminal [FMA]
Output current at terminal [FMA]
Average output voltage at terminal [FMP]
Pulse rate at terminal [FMP]
Select desired menu by moving the pointer Æ with /
key.
Press
key to finalize desired menu.
/
/
/
/
/
/
Analog output signal
Analog input signal
I/O signal (hex)
Output signal
Input signal coming via communication link
Input signal at control circuit terminal block
Common
operation:
To c on fir m
data, call the
desired page
using
/
key.
Press
key to return
to Menu.