5-54
61 1061 Mount motor 1, commercial-power-driven (M1_L)
62 1062 Mount motor 2, inverter-driven (M2_I)
63 1063 Mount motor 2, commercial-power-driven (M2_L)
64 1064 Mount motor 3, inverter-driven (M3_I)
65 1065 Mount motor 3, commercial-power-driven (M3_L)
67 1067 Mount motor 4, commercial-power-driven (M4_L)
68 1068 Periodic switching early warning (MCHG)
69 1069 Pump control limit signal (MLIM)
99 1099 Alarm output (for any alarm) (ALM)
A mark "-" in the Active OFF column means that a negative logic cannot be applied to
the terminal function.
The negative logic for 59 (Terminal C1 off signal) is corresponded with the inverte
To Next Page
Loading...
