EasyManuals Logo

Fuji Xerox ApeosPort-VII C4421 User Manual

Fuji Xerox ApeosPort-VII C4421
516 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
2 Setup
44
Connecting to a High Security Network via CentreWare Internet Services
The Wi-Fi connection feature on the device supports IEEE802.1X authentication. To use
IEEE802.1X authentication method, which requires a certificate, get the necessary
certificate issued by the certificate authority and import it to the device from CentreWare
Internet Services.
The required certificates on each IEEE802.1X authentication method are as follows.
* : Necessary when server certificate verification is enabled. Server certificate verification is performed when a CA certificate is
registered.
The kit supports the following certificates:
X509 certificate (DER/PEM) (root CA certificate)
PKCS#7 (DER) (root CA certificate)
PKCS#12 (DER) (device certificate (=client certificate)/root CA certificate)
Note
To import a certificate via CentreWare Internet Services, HTTP communication must be encrypted. For more
information on CentreWare Internet Services operation and how to set encryption for HTTP communication,
refer to "Configuration of HTTP Communications Encryption" (P.344).
For information on the supported certificates, refer to "Encryption and Digital Signature Overview" (P.340).
1
Enter the device's IP address in the address box on the Web browser, and press the <Enter>
key to start CentreWare Internet Services.
2
Import a certificate.
1) Click [Log In].
2) Enter the System Administrator’s User ID and Passcode on the displayed screen, and
then click [OK].
After the confirmation screen appears, click [Close] two times continuously.
3) Click [System] > [Security] > [Certificate Settings].
4) Click [Import].
5) Click [Select] to specify the name of the file to import.
6) Enter the password of the certificate for [Password].
7) Enter the password again for [Retype Password].
8) Click [Start].
9) Refresh the web browser.
3
Configure Wi-Fi connection settings.
1) Click the [Network].
2) Click [Connection] > [Wi-Fi].
The [Wi-Fi] screen appears.
Item EAP-TLS EAP-TTLS PEAP
CA Certificate Necessary Necessary
Optional
*
Client Certificate Necessary - -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-VII C4421 and is the answer not in the manual?

Fuji Xerox ApeosPort-VII C4421 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-VII C4421
CategoryPrinter
LanguageEnglish

Related product manuals