Fuji Xerox Color 550 User Manual

2 Product Overview
38
Product Overview
2
Finisher C2 (optional) and Finisher C2 with Booklet Maker (optional)
Note • The Finisher C2 and the Finisher C2 with Booklet Maker are optional. In this guide, the
Finisher C2 and the Finisher C2 with Booklet Maker are referred to as the "finisher".
No. Component Function
1 Hole punch waste
container
Collects scraps from the puncher. Pull out this container when
discarding punch scraps.
2 Output tray Outputs are delivered here.
3 Exit cover Open this cover when clearing paper jams.
4 Finisher tray Outputs are delivered here.
5 Staple cartridge Contains staples. Remove this cartridge when replacing or adding
staples, or clearing staple jams.
6 Booklet tray
(Finisher C2 with Booklet
Maker only)
Documents are delivered here when folding is selected for the Booklet
Creation feature.
7 Front cover Open this cover when clearing paper jams, replacing or adding staples,
clearing staple jams, or discarding punch scraps.
8 Booklet unit
(Finisher C2 with Booklet
Maker only)
Folds documents in half and staples the folded documents.
9 Booklet staple cartridges There are two staple cartridges installed for Booklet Creation (gutter).
Take the cartridges out when clearing staple jams, or when replacing
them with new ones.
1
2
3
4
5
6
7
8
9

Fuji Xerox Color 550 Specifications

General

Brand	Fuji Xerox
Model	Color 550
Category	Printer
Language	English