5 Tools
118
Tools
5
IPv6 - IP Filter
Select whether or not to filter IP addresses.
Note • To set the IP addresses that the machine accepts connection from, use CentreWare Internet
Services. For details, refer to "CentreWare Internet Services Settings" (P.193).
Machine’s E-mail Address/Host Name
Set the e-mail address and host name for the machine. In [Machine’s E-mail Address/
Host Name], you can set the following items.
E-mail Address
Enter the E-mail address for the machine with the numeric keypad displayed by pressing
[Change Settings]. Up to 128 single-byte characters are allowed.
When receiving E-mail via SMTP
You can set any name for the account (on the left side of @). Set the address section (on the
right side of @), with the combination of the host name and domain name. An alias cannot be
set.
Example: mymail@myhost.example.com
z
Account name: mymail
z
Host name: myhost
z
Domain Name: example.com
When receiving E-mails via POP3
Enter the POP user name (on the left side of @) and incoming POP3 mail server name in the
address section (on the right side of @). You can set an alias, such as
mymail@example.com.
Example: mymail@myhost.example.com
z
Account name: mymail
Machine Name
Enter the machine name with the numeric keypad displayed by pressing [Change Settings].
Up to 32 single-byte characters are allowed.
Host Name
Enter the host name with the numeric keypad displayed by pressing [Change Settings]. Up to
32 single-byte characters are allowed.
Domain Name
Enter the domain name with the numeric keypad displayed by pressing [Change Settings].
Up to 64 single-byte characters are allowed.
Proxy Server Settings
Configure the settings for a proxy server.
Configure a proxy server when inbound/outbound access is used.
Important • Do not set this item unless you use services requiring proxy settings.
Use Proxy Server
Select whether to use a proxy server.
To Next Page
Loading...
