EasyManua.ls Logo

Fuji Xerox DocuCentre-III 2007

Fuji Xerox DocuCentre-III 2007
503 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Replacing Consumables
49
Maintenance
3
Replacing the Stamp Cartridge
If the machine offers the Fax service, replace the stamp cartridge when stamp
impressions start to fade.
Important Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
immediately.
Problems caused by using consumables not recommended by Fuji Xerox are not covered by
the maintenance service contract.
Before using consumables, carefully read the instructions and precautions on the packaging.
Note We recommend having spare consumables ready.
To order a stamp cartridge, contact our Customer Support Center.
(Product name: Stamp Replacement Kit (red), Product code: F451)
1
Pull up the knob on the left cover of
the document feeder, and open the
document feeder cover completely.
2
Pull up the green lever to open the
inner cover.
3
Stick the supplied pin into the old
stamp cartridge, and pull it straight
out of the machine.
Note If only the sponge part of the
stamp cartridge is removed,
make sure to remove the
bottom part of it also.
4
Insert the new stamp cartridge in
the machine.
5
Close the inner cover, and then
close the document feeder cover until it clicks into place.

Table of Contents

Related product manuals