3 Maintenance
48
Maintenance
3
Important • Make sure you empty the hole punch waste container when the power is on. If you empty
the container when the power is off, the machine will not recognize that the container has
been emptied.
1
Make sure that the machine is not
operating, and lift the top cover and
open the front transport cover of
the finisher.
2
Pull out the hole punch waste
container.
3
Empty the container.
4
Insert the empty hole punch waste
container all the way into the
finisher.
5
Close the front transport cover and the top cover of the finisher.
Note • If the front cover of the finisher is not completely closed, a message will appear and the
machine will not operate.
To Next Page
Loading...
Need help?
General
