Interface Cables
17
Before Using the Machine
1
Interface Cables
When connecting the machine directly to a computer, use USB interface. When
connecting to a network, use the Ethernet interface.
Using the USB Interface
The USB interface supports USB 2.0.
This section describes the installation procedure for the USB interface.
1
Ensure that the machine is off.
2
Connect the USB interface cable to
the USB 2.0 interface connector on
the side of the machine.
3
Connect the other end of the USB
interface cable to a computer.
4
Switch on the machine.
5
Restart the computer.
For details of setting items, refer to "Installation When Using USB Port" (P.205)
Using the Ethernet Interface
The Ethernet interface supports the following 2 types.
z
100BASE-TX
z
10BASE-T
This section describes the installation procedure for the Ethernet interface.
1
Ensure that the machine is off.
2
Connect the network cable to the
Ethernet interface connector.
Note • Prepare a network cable
suitable for your network
connection. When changing
the network cable, consult our
customer engineers.
3
Switch on the machine.
USB interface
connector
Ethernet
interface
connector
To Next Page
Loading...
