Configuration of Encryption using IPSec
261
Encryption and Digital Signature Settings
12
• If the certificate to be imported contains the V3 extension "keyUsage", "digitalSignature"
must be set to On.
1) Click the [Properties] tab.
2) Click [+] on the left of [Security] to display the items in the folder.
3) Click [Machine Digital Certificate Management].
4) Click [Upload Signed Certificate].
5) Enter [Password].
6) Enter [Retype Password].
7) Enter a file name you want to import. Or select a file to be imported from a dialog
box displayed by clicking the [Browse] button and then click [Open].
8) Click the [Import] button. When a screen to enter the user name and passcode
appears, enter the system administrator’s user ID and passcode into [User Name]
and [Password], and then click [OK].
Note • The default user ID is "11111" and the default passcode is "x-admin".
9) Refresh the web browser.
3
Click [+] on the left of [Security] to display the items in the folder.
4
Configure the certificate.
1) Click [Certificate Management].
2) Select [Local Device] for [Category], [IPSec] for [Certificate Purpose], and then
click the [Display the List] button.
3) Select the certificate to be set.
4) Click the [Certificate Details] button.
5) Click the [Use this certificate] button.
6) Click [Reboot Machine]. The machine will reboot and the setting values will be
reflected.
Step2 Configuration on the Machine (Configuration of IPSec)
The following explains how to configure IPSec on the Machine.
1
Press the <Log In/Out> button.
2
Enter the system administrator’s user ID with the numeric keypad or a keyboard, and
select [Enter].
When a passcode is required, select [Next Input] and enter the system administrator’s
passcode, then select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools].
4
Select [Connectivity & Network Setup].
5
Select [Security Settings].
6
Select [IPSec Settings].
7
Configure the required settings.
To Next Page
Loading...
