5 Tools
124
Tools
5
îš„Search Entries by Surname
Set whether to use [Attribute Type of Surname] when names are used as search keys.
îš„Search Entries by Given Name
Set whether to use [Attribute Type of Given Name] when names are used as search keys.
îš„Attribute Type of Name
Set the recipient name attribute type. Up to 32 characters are allowed.
îš„Attribute Type of Surname
Set the sender's family name attribute type. Up to 32 characters are allowed.
îš„Attribute Type of Given Name
Set the sender's first name attribute type. Up to 32 characters are allowed.
îš„Attribute Type of E-mail Address
Set the e-mail address attribute type. Up to 32 characters are allowed.
îš„Attribute Type of Custom Item 1, 2, and 3
Set the LDAP attribute type of custom items 1 to 3. Up to 32 characters are allowed.
îš„Attribute Name of Custom Item 1, 2, and 3
Set the attribute names assigned to custom items 1 to 3. You can enter up to 16 characters.
îš„Attribute Type of Certificate
Set the certificate attribute type. Up to 32 characters are allowed.
îš„Maximum Number of Search Results
Set the upper limit on the number of searched address results from 5 to 100. If there are more
search results than the upper limit, the search operation is stopped at that number.
îš„Search Time-Out
Select whether or not to set a search time-out. Set the value from 5 to 120 seconds in 1
second increments.
îš„Directory Service for Address Book
Select whether to use an address book stored on the directory server.
Even when [Enabled] is selected, unless the following conditions are satisfied, the address
book of the directory server will not be started.
z
The IP address of the directory server (primary) of the machine must be set
z
The IP address or Internet address of the directory server (primary) must be set
z
The port numbers used for LDAP communication must be set on the directory server and the
machine
SMB Server Settings
îš„SMB Server Setup
Select the server specification method from [Domain Name] and [Domain & Server Name/
Address].
According to the option you selected here, set [Domain Name] and [Server Name/IP Address]
for each of SMB servers 1 to 5.
îš„Domain Name
Enter the domain name of the server. Up to 64 characters are allowed.
This setting is mandatory.
Important • Use the NetBIOS or Active Directory domain name for the domain name.
îš„Server Name/IP Address
Enter the server name or IP address.
This setting is effective when [SMB Server Setup] is set to [Domain & Server Name/IP
Address].
Important • Use the NetBIOS computer name or full computer name with DNS suffix for the server
name.
To Next Page
Loading...
Need help?
General
