5 Tools
134
Tools
5
LPD Print Queue
Set the LPD print sequence.
Note • If this setting is changed, the setting in Receiving Buffer - LPD (P.130) may automatically be
changed.
For information on [Receiving Buffer - LPD Spool], refer to "Receiving Buffer - LPD" (P.130).
îš„Data Processing Order
Prints jobs in order of completion of job processing.
If two or more jobs are continuously submitted, a smaller-size job may be printed first.
îš„Job Submission Order
Prints jobs in order of lpr print submission.
Important • This setting is only enabled when the receiving buffer of the LPD is [Spool to Hard Disk].
When any other setting is set, printing is performed in [Data Processing Order].
To Next Page
Loading...
Need help?
General
