Energy Saver Mode
19
Before Using the Machine
1
3
Select [Tools].
4
Select [Machine Clock/Timers].
5
Select [Power Saver/Energy Saver
Timers], and select [Change
Settings].
6
Using [] and [], configure an
energy saver mode migration time,
in 1 minute increments.
From Last Operation to Low Power Mode
Set the time to move to the [Low Power Mode] after the last operation.
Note • The default for [From Last Operation to Low Power Mode] is [2] minutes. The Low Power
Mode cannot be disabled.
From Last Operation to Sleep Mode
Set the time to move to the [Sleep Mode] after the last operation.
Note • The default for [From Last Operation to Sleep Mode] is [2] minutes. Configure the [From Last
Operation to Sleep Mode] time to be longer than the [From Last Operation to Low Power
Mode] time.
7
Select [Save].
8
Select [Close] repeatedly until the [Tools] screen is displayed.
9
Select [Close] to display the [All Services] screen.
To Next Page
Loading...
