2 Paper and Other Media
28
Paper and Other Media
2
Unusable Paper
Using paper that is not recommended by Fuji Xerox may cause a paper jam or a
machine malfunction.
Use paper and OHP films recommended by Fuji Xerox.
z
Damp or wet paper
z
Paper pre-printed with other printer or copier
z
Wrinkled, creased, or ripped paper
z
Envelopes that are not flat, or that have clasps
z
Color paper with surface treatments
z
Paper with rough surface, such as pulp paper or fibrous paper
Storing and Handling Paper
îš„Please keep the following points in mind when storing paper
z
Store paper inside a cabinet or in other dry place. Paper that has absorbed moisture
can cause paper jams and image quality defects.
z
After opening a package of paper, wrap up the remaining paper to store it. It is
recommended that you include moisture prevention packets.
z
Store paper on a flat surface to prevent bends or warping.
îš„Please adhere to the following when setting paper into the tray
z
Align the stack of paper neatly before setting it in the tray.
z
Do not use paper that is folded, creased, or heavily warped.
z
Do not use waved or curled paper.
z
Do not load paper of mixed size together into the tray.
z
Transparency paper and label paper can cause paper jams, and multiple sheets can
be fed to the printer at once. Be sure to carefully fan these types of paper.
z
When continuously outputting onto transparencies, transparency sheets may
sometimes stick to each other. Remove transparencies from the output tray every 20
or so sheets, and fan them to cool them down.
To Next Page
Loading...
Need help?
General
