14 Problem Solving
304
Problem Solving
14
Documents are
often jammed.
Are the suitable types of
documents used?
Correctly load documents suitable for the
document feeder.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Are you trying to copy
irregular shaped
documents, business cards,
transparencies, or thin
documents?
Are you trying to copy
documents with sticky
labels, paper clips or
adhesive tape?
Remove sticky labels, paper clips or
adhesive tape from the document before
copying.
Are the document guides in
the correct positions?
Adjust the document guide positions.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Is a piece of torn paper
remaining in the document
feeder?
Open the document feeder cover and
check inside.
Refer to "Document Jams" (P.417).
Is the [Mixed Sized
Originals] setting set to [On]
when you copy originals of
different sizes?
Set [Mixed Sized Originals] to [On].
Refer to "3 Copy" > "Layout Adjustment" >
"Mixed Sized Originals (Scanning Different
Size Documents Simultaneously)" in the User
Guide.
Is an A5 document loaded
in landscape orientation
( ) on the document
feeder when the Mixed
Sized Originals feature is in
use?
Load the A5 document in portrait
orientation ( ).
A corner of the
document is
folded.
Is the document curled? Flatten out the curl and load the document
again.
Stapler Faults - Refer to "Stapler Faults" (P.419).
Symptom Cause Remedy
To Next Page
Loading...
Need help?
General
