Fuji Xerox DocuCentre-III 2007 User Manual

Specifications
431
Appendix
15
Finisher-B1 (optional)
*1 Based on when larger size paper is stacked on paper.
*2 For the center binding/folding feature, Booklet Maker Unit for Finisher-B1 is required. After a job
with center binding/folding specified was output, remove the output paper from the tray to output the
next job. In addition, when you print a job with center binding/folding specified and smaller-sized
paper remains on the output tray, remove the paper from the tray first.
*3 For the Punching feature, US 2/3 Hole Punch Kit for Finisher-B1 or 2/4 Hole Punch Kit for Finisher-
B1 is required.
Type Finisher tray × 1: Collated (offset stacking available)/
Uncollated (offset stacking available)
Paper Size/Paper
Weight
Finisher tray Maximum: A3, 11 x 17"
Minimum: B5,
56 - 215 g/m
2
Stacker Capacity Finisher tray (For paper not stapled)
A4: 2,000 sheets
B4 or larger: 1,000 sheets
Mixed stack*
1
: 300 sheets
Finisher tray (For paper stapled)
A4: 100 sets or 1,000 sheets
B4 or larger: 75 sets or 750 sheets
Center folding
*2
: 50 sets or 600 sheets
Folding
*2
: 500 sheets
Important • When using 80 g/m
2
paper
Staple Capacity : 50 sheets (90 g/m
2
or less)
Paper Size : Maximum: A3, 11x17", Minimum: B5
Position : 1 place (front: angled stapling
*2
, back:
straight stapling),
2 places (parallel stapling)
Important • When using 80 g/m
2
paper
Punch
*3
Paper Size : A3, 11×17", A4, A4 , 8.5x11",
8.5x11" , B4, B5
Number of Holes : 2, 3, or 4
Paper Weight : 56-200 g/m
2
Important • When using 80 g/m
2
paper
Booklet Finishing
*2
Capacity : 15 sheets (center binding),
5 sheets (folding)
Paper Size : Maximum: A3, 11×17",
Minimum: A4, 8.5 x 11"
Paper Weight : 64-80 g/m
2
(center binding)
64-105 g/m
2
(folding)
Important • When using 80 g/m
2
paper
Dimensions/Weight Width 565 × Depth 552 × Height 942 mm, 27 kg
Width 565 × Depth 597 × Height 1,057 mm, 36 kg (When Booklet
Maker Unit is attached)
Space Requirement Width 1,614 x Depth 668 mm (Main unit + Finisher-B1, when the
extension tray is extended, when Bypass Tray is fully extended)
Width 1,614 x Depth 688 mm (Main unit + Finisher-B1,+ Booklet
Maker Unit, when the extension tray is extended, when Bypass
Tray is fully extended)

Fuji Xerox DocuCentre-III 2007 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-III 2007
Category	All in One Printer
Language	English