15 Appendix
456
Appendix
15
Symbol Set 208 [0] (Default): Roman 8
[1]: ISO 8859-1 Latin 1
[2]: ISO 8859-2 Latin 2
[3]: ISO 8859-9 Latin 5
[4]: ISO 8859-10 Latin 6
[5]: PC-8
[6]: PC-8 DN
[7]: PC-775
[8]: PC-850
[9]: PC-852
[10]: PC-1004 (OS/2)
[11]: PC Turkish
[12]: Windows 3.1 Latin 1
[13]: Windows 3.1 Latin 2
[14]: Windows 3.1 Latin 5
[15]: DeskTop
[16]: PS Text
[17]: MC Text
[18]: Microsoft Publishing
[19]: Math 8
[20]: PS Math
[21]: Pi Font
[22]: Legal
[23]: ISO 4 United Kingdom
[24]: ISO 6 ASCII
[25]: ISO 11 Swedish:names
[26]: ISO 15 Italian
[27]: ISO 17 Spanish
[28]: ISO 21 German
[29]: ISO 60 Norwegian v1
[30]: ISO 69 French
[31]: Windows 3.0 Latin 1
[32]: Windows Baltic
[33]: Symbol
[34]: Wingdings
[35]: UCS-2
Font Size 209 [400] - [5000] (Default: [1200]): Specifies the point size of a font in
increments of 25. The value of 100 represents 1 point.
Font Pitch 210 [600] - [2400] (Default: [1000]): Specifies the pitch size of a font. The
value of 100 represents the pitch size of 1.
Form Line 211 [5] - [128] (Default: [64] or [60]*): Specifies the number of lines on a page.
* The default value will be [64] if the default value of the item 202/203 is
[4]; [60] if the value for 202/203 is [23].
Print Sets 212 [1] - [999] (Default: [1]): Specifies the number of print sets.
Image Enhance 213 [0] : Off
[1] (Default) : On
Sets whether to enable the enhanced image mode.
Hex Dump 214 [0] (Default) : Off
[1] : On
Sets whether to enable a hex dump.
Draft Mode 215 [0] (Default) : Off
[1] : On
Sets whether to enable the draft mode.
Binding 217 [0] (Default) : LEF
[1] : SEF
Specifies which edge of paper is to be bound.
Line Termination 218 [0] (Default) : Off
[1] : Add-LF (Appends an LF to CR)
[2] : Add-CR (Appends a CR to LF and FF)
[3] : CR-XX (Appends a CR to LF and FF, and LF to CR)
Default Custom
Paper Size
219
(Short edge)
[0] - [9999] : 0 to 9999
[2100] (Default short-edge value): 210.0 mm
[2970] (Default long-edge value): 297.0 mm
Specifies the default custom paper size.
220
(Long edge)
Parameter
I
tem No. Value
To Next Page
Loading...
Need help?
General
