Fuji Xerox DocuCentre-III 2007

Notes and Restrictions
487
Appendix
15
be communicate with a device that is specified using the domain name, and (4) the
machine has just been turned on.
z
The machine may display an incorrect machine address.
Example:
(1) Either the IPv4 or IPv6 address is not displayed in Dual Stack mode.
(2) A different IPv6 address is displayed.
z
When a document is printed via an IPv6 network, the Secure Watermark feature is
not available.
z
A time synchronization server cannot be specified in IPv6 format. Use the IPv4
format to specify a time synchronization server.
z
The following operating systems support IPv6 printing.
- Windows Vista
-Linux distributions with CUPS (Common Unix Printing System) that supports IPv6
z
WINS does not support IPv6 communication.
z
NetWare does not support IPv6 communication. Use IPv4 for Netware.
z
When a self-signed certificate is used for SSL communication, note the following
restrictions.
(1) When the machine is specified using the domain name (for IPv4 or IPv6):
Set the host name and domain name for the machine before creating a self-
signed certificate.
Example:
When the domain name is "csw.ipv6.domain.local":
Host name: csw
Domain name: ipv6.domain.local
(2) When the machine is specified using the IPv4 address:
The self-signed certificate that is created in IPv4 or Dual-Stack mode needs to
be imported.
(3) When the machine is specified using the IPv6 address:
Secure IPP (IPP-S) communication is not available.
z
Bonjour does not support IPv6 communication. Use IPv4 for Bonjour.
z
When IPv6 is enabled and IPv4 is disabled on the machine, the Browse function of
the Scan to PC (SMB) service is not available.
z
When the Scan to PC (FTP) service is used, file names must be ASCII characters.
z
In the following cases, the lpq command (for status check) and the lprm command
(for canceling) may not be available for LPD print jobs.
-When IPv4 and IPv6 addresses are configured in the Dual-Stack mode.
-When the IPv6 address is a temporary address.
z
IPv6 addresses may not be correctly recorded on job logs. Use an IPv4 network for
correct logging.
z
When searching a device outside the router via SMB, directly specify the address.
Multicasting is supported only within a local link (FF02::1).
z
In IPv6 environment without a DNS server, if a computer name is specified in the
SMB server settings for SMB authentication, the authentication fails. Specify IPv6
address directly for a computer name of the authentication server.