4 Machine Status
74
Machine Status
4
1
Press the <Log In/Out> button.
To check the billing meter of a currently authenticated user ID
1) Using the numeric keypad or the
keyboard displayed, enter the
user ID of a user whose billing
meter needs to be checked, and
select [Enter].
Note • When a passcode is required,
select [Next Input] and enter the user’s passcode, then select [Enter].
2) Press the <Machine Status> button.
3) Proceed to Step 2.
To check the system administrator meter
1) Using the numeric keypad or the keyboard displayed, enter the user ID to enter the
System Administration mode, and select [Enter].
When a passcode is required, select [Next Input] and enter the system
administrator’s passcode, then select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
2) Press the <Machine Status> button.
3) Proceed to Step 2.
2
Select the [Billing Information] tab.
3
Select [User Account Billing
Information].
4
Select the meter to be checked.
Note • Meters appear when the
auditron mode for the service
is enabled.
Meter (Copy Jobs)
Displays the number of pages copied.
Meter (Scan Jobs)
Displays the number of pages scanned.
Meter (Print Jobs)
Displays the number of pages printed.
To Next Page
Loading...
