FujiFilm 3000 - Printing Posters Smaller Than Paper Size

Printing different poster sizes

23
ENGLISH
5.2 PRINTING POSTERS SMALLER THAN THE PAPER SIZE
Procedure for printing posters smaller in width than the paper size.
5.2.1 Using A1 paper to produce a B2 size poster


The output size is shown here
1 Select the paper type, mode and contrast.
Set the OUTPUT SIZE so that it appears as B2
on the message display.
2 Place the original into the document bay face down.
Press the START/STOP key to begin printing.
Make sure the original is placed firmly
along the document guide closest to
you, and into the scanner until it stops.
3 When the printing process is complete, cut the print
with the paper cutter.
BIG SIZE
POSTER
POSTER PRINTER
4 Cut away the excess margin area, using the cutting
marks provided as a guide.
NOTE: When printing posters of smaller width
than the paper size, cutting marks are automatically
printed on the output.
Move the cutter in
a downward horizontal
sliding motion while
holding the paper out
from the printer.
Cutting mark
Cutting mark
Excess margin