FujiFilm 3000 - Specifications

Specifications

37
ENGLISH
Type
Scanning system
Scanning
resolution
Input size
Input format
Printing system
Printing modes
Printing resolution
Paper size
Paper types
Output sizes
Paper supply
Paper cutting
Print size and
printing speed
Warm-up time
Noise level
Dimensions/
weight
Power supply
Power
consumption
Operating
environment
Items included
in package
Optional
accessory
Supplies
Desktop type printer
Fixed contact image sensor
16 dot/mm (400 dpi)
A4 size, banner (A4 wide)
Sheet paper, thickness 50 – 350 microns
Thermal printing
Normal, photo, reverse, online (optional)
12 dot/mm (300 dpi)
A1, A2 wide paper rolls
FUJIFILM Poster Printer paper
Direct Thermal Paper (DTP), Thermal Transfer Paper (TTP), Heavy Duty Poly Paper (HDP)
A4, B4, A3, B3, A2, B2, A1, (A0 and A0 x 2 are printed in two pieces)
Banner (calculated as being roughly equivalent to length of document times specified enlargement)
Continuous feed roll paper
Bidirectional manual cutter
Output size Enlargement Normal/Photo/Reverse modes
(line magnification) Direct Thermal Paper Thermal Transfer/HDP
A2 Approx. 1.7 Approx. 1 min 30 sec Approx. 1 min 12 sec
A1 Approx 2.7 Approx. 1 min 24 sec Approx. 1 min 36 sec
Approx. 8 seconds
Approx. 53 dB (A)
Approx. 715 (W) x 315 (D) x 215 (H) mm;
Approx. 14 kg
AC 230V ±10% ; 50 Hz
At standby: approx. 15W;
Printing: approx. 210W
Temperature: 10 – 30 °C;
Relative humidity: 20 – 80% RH
Paper bracket (1), end caps (2), A1 direct thermal paper roll,
User’s Guide
Interface kit
Platen rubber, thermal heads, cutter unit, cutter base
Specifications