FujiFilm FinePix REAL 3D W3 - DPOF Print Indicator

54
Printing Pictures via USB (D Only)
3
Repeat steps 1–2 to complete the
print order. Press MENU/OK to save
the print order when settings are complete,
or DISP/BACK to exit without changing the print
order.
4
The total number of prints is dis-
played in the monitor. Press MENU/OK
to exit.
The pictures in the current
print order are indicated by a
u icon during playback.
■
■
RESET ALL
RESET ALL
To cancel the current print or-
der, select RESET ALL in the
K PRINT ORDER (DPOF)
menu. The con rmation shown
at right will be displayed; press
MENU/OK to remove all pictures from the order.
1 Notes
• Remove the memory card to create or modify a print
order for the pictures in internal memory.
• Print orders can contain a maximum of 999 pictures.
• If a memory card is inserted con-
taining a print order created by
another camera, the message
shown at right will be displayed.
Pressing MENU/OK cancels the
print order; a new print order
must be created as described above.
CANCELYES
RESET DPOF OK?
CANCELYES
RESET DPOF OK?
NOYES
RESET DPOF OK?
NOYES
RESET DPOF OK?