57
Connections
Viewing Pictures on a Computer
1
If the pictures you wish to copy are stored on a
memory card, insert the card into the camera
(pg. 10). If no card is inserted, pictures will be
copied from internal memory.
1 Note
The Windows CD may be required when the soft-
ware is started for the rst time.
3 Caution
Loss of power during transfer could result in loss of
data or damage to internal memory or the memory
card. Charge the battery before connecting the
camera.
2
Turn the camera o and connect the supplied
USB cable as shown, making sure the connec-
tors are fully inserted. Connect the camera di-
rectly to the computer; do not use a USB hub
or keyboard.
3
Press the a button for about a second to turn
the camera on. MyFinePix Studio will start au-
tomatically; follow the on-screen instructions
to copy pictures to the computer. To exit with-
out copying pictures, click Cancel.
3 Caution
If the software does not start automatically, it may
not be correctly installed. Disconnect the camera
and reinstall the software.
For more information on using the supplied soft-
ware, start the application and select the appro-
priate option from the Help menu.
Connecting the Camera
To Next Page
Loading...
