FujiFilm FinePix REAL 3D W3 - Bframe no; Hdmi Output; Frame Number

83
Menus
The Setup Menu
B
B
FRAME NO.
FRAME NO.
New pictures are stored in im-
age  les named using a four-
digit  le number assigned
by adding one to the last  le
number used. The  le num-
ber is displayed during playback as shown at
right. B FRAME NO. controls whether  le num-
bering is reset to 0001 when a new memory card
is inserted or the current memory card or internal
memory is formatted.
• CONTINUOUS: Numbering continues from the last
 le number used or the  rst available  le num-
ber, whichever is higher. Choose this option to
reduce the number of pictures with duplicate
 l e n a m e s .
• RENEW: Numbering is reset to 0001 after format-
ting or when a new memory card is inserted.
1 Notes
• If the frame number reaches 999-9999, the shutter
release will be disabled (pg. 98).
• Selecting R RESET (pg. 79) resets B FRAME NO. to
CONTINUOUS but does not reset frame numbering.
• Frame numbers for pictures taken with other cam-
eras may di er.
w
w
HDMI OUTPUT
HDMI OUTPUT
Choose a display format for output to HDMI de-
vices.
• 3D: Choose for output to devices that support
3D display.
• SIDE-BY-SIDE: Choose for output to devices that
support side-by-side 3D display. Be sure to con-
 gure the television for side-by-side display as
described in the television manual.
• 2D: Choose for output to High De nition (HD)
devices.
100-0001
100-0001
Frame number
File
number
Directory
number
100-0001
100-0001
Frame number
File
number
Directory
number