3. Machine Set Up QD002-07
120 NXT Setup Manual
6. While looking at a level gauge, turn the adjustment knob and ensure the the machine is
level in the X-direction.
7. Tighten the lock knob by turning it to the left.
8. While looking at a level gauge, turn the handle to adjust the tray unit-L until it is level in
the Y-direction.
Caution: As the tray unit-L is clamped in the machine, the connector pins can be damaged when the height of
the tray unit-L is changed. Care should be taken when adjusting the height.
9. Tighten the left and right lock levers.
10.Lock the left and right caster brakes.
Adjusting knob
Lock knob
XX'
NXTMTU016E
Handle
YY'
NXTMTU017Ea
Caster brakes
To Next Page
Loading...