QD002-07 1. Safety Guideline
NXT Setup Manual 5
CAUTION
Do not operate the machine after removing or disabling
sensors
• Removing or disabling sensors will disarm the interlock, leading
to collisions and damage to the machine.
Confirm the operational status at the machine messages for
machines that support automatic changeover
• On machines equipped with an automatic changeover system,
it is difficult to ascertain the changeover status from the front of
the machine during operation in production mode. Follow the
instructions that display at the machine monitor
Ensure to use the handle when opening or closing the safety
doors, fences or covers
• Opening or closing the safety doors, fences or covers without
using the handle may result in injury to the hand.
• Opening or closing the safety doors, fences or covers with force,
without using the handle may result in damage to the machine.
To Next Page
Loading...