1. Safety Guideline QD002-07
4 NXT Setup Manual
Do not wear gloves made of cloth when operating the
machine
• Rubber gloves will tear when caught by the machine and
prevent hands from being drawn into the machine. Gloves
made of cotton or similarly strong material may cause hands to
be drawn into the machine.
Long hair should be tied back
• Long hair may get caught in running machines.
Hair should be kept short or tied back so that it does not get
caught in the machine.
Turn off the air supply when carrying out maintenance on
cylinders, valves, and filters
• Removing cylinders, valves, or filters without turning the air
supply off, may cause parts or particles to be propelled into the
eyes.
• Be sure to turn off the air supply when carrying out maintenance
on cylinders, valves, and filters.
Be sure to wear protective glasses when removing parts
from the machine
• Be sure to wear protective glasses when removing or
disassembling parts.
Check the machine monitor and the target axes while
manually operating the machine
• When operating the machine, carefully follow the instructions
that are displayed at the machine display.
• Operating the machine without looking at the machine display
may lead to operating errors or result in damage to the machine
or products.
Do not touch the servo amp power terminal for at least five
minutes after turning off the power
• The servo amp retains a high voltage even after the power has
been turned off.
• Always wait at least five minutes, and ensure that the CHARGE
lamp is off, before undertaking any work that may result in
contact with the servo amp terminal.
WARNING
To Next Page
Loading...