QD002-07 1. Safety Guideline
NXT Setup Manual 9
CAUTION
Be careful to not pinch your hands when opening and closing
the front or side covers.
• Failure to do so could result in injury.
Do not insert fingers or other body parts into the gap between
the machine side cover and base.
• Failure to do so could result in injury.
When working in front of the base, ensure that clothing or arms
are not caught on the guide pins on the top of the base to
prevent the risk of injury.
• Failure to do so could result in injury.
When there is no module on the base, do not block the module
position confirmation sensor or module seating confirmation
sensor to activate the air cylinder.
• Air cylinder may activate to move lever or clamper causing
personnel injury.
Do not push the mark camera unit by hand when moving the
placing head.
• The position of the mark camera may be shifted, which negatively
affects the placing accuracy of the machine.
Be careful to not put your hands underneath the nozzle station
when loading it in the machine.
• Failure to do so could result in injury.
Ensure to place the waste tape disposal unit with the duct
upside on the work bench.
• The duct of the unit may creep by its own weight.
Be careful of the magnetic attraction when using a jig near the
linear motor of the M6S.
• Injury could result by a jig being drawn towards the linear motor.
Keep magnetic cards, wristwatches and other precision
machines away from the linear motor of a M6S module.
• Damage to items may occur due to the magnetic field generated by
a linear motor.
To Next Page
Loading...